PRODUCTS DATA SHEETS

Railing system 

Deco Railing

Model code: DR 1, DR 2, DR 3, DR 4, DR5

Fixed on top of concrete and wood deck

(Top Mounted)

1. Products:

The aluminum Decor Railing assembled, according to Alumiguard MFG standards, is consistent with the regulations of the Ontario Building Code applicable.

2. Materials;

     2.1 Components

The Decor Railing components are composed of aluminum extrusions alloy 6063- T5. 

The post AG 001 is extruded in a high-strength aluminum alloy with superior mechanical characteristics. It includes an AG 002 aluminum base for the installation on top of concrete slabs and wood deck allowing a perfect adjustment of each aluminum post.

Alumiguard MFG standard posts are square-shaped of 3” x 3” and 2” x 2”. The pickets AG 007 ¾” x ¾” are 3 ¼ inch c/c. The spindles AG 006 ½” x ¾” are attached to the posts with self-tapping screws.

The top aluminum handrail, AG 005 depending on the choice of the customer comes in 3 different styles, Rectangular, Round and Crown with a length of maximum 192 inch. The bottom aluminum handrail AG 009, comes in lengths of maximum 192 inch.

Posts and aluminum bases are covered with Plastic Covers AG 016 which fit the component. 

     2.2 Decor Railing finish

The Decor railing systems will be powder-coated with colors to be selected by the customer. Alumiguard MFG standard colour chart comprises White, Warm Beige, Black, Clay, Commercial Brown, Charcoal and Cashmere.

     2.3 Bindings

All anchor bolts and plugs for concrete shall be steel type 316 SS/ 304SS. Lag screws for wood are in stainless steel, 410 SS/ 304S. Wood blockings under the deck are used to fix the Lag screws. Self-tapping screws are used for other assemblies and are in zinc.

3. Fabrication / Installation

Alumiguard MFG aluminum Décor railing system will be delivered on the job site in pre-assembled elements if the customer requires it and will be installed according to the Alumiguard’s MFG instructions.

4. Décor Railing Height

The total heights of the décor railing will be 407mm minimum (16”) and maximum 610 mm (24”). All the measurements will be taken on the job site before the fabrication is made.

5. Submittals:

Submitted shop drawings will be sealed by a professional engineer and will indicate materials, dimensions, thicknesses, connections, joints method of anchorage, number of anchors, supports details, accessories and relationship to adjacent work.